Solvent Kleene Non-Hazardous Degreasing and Paint Stripping Products
Solvent Kleene Non-Hazardous
Degreasing and Paint Stripping Products
978-531-2279
D-Zolve 1012 Paint and Powder Coating Remover
Designed to efficiently
strip hard-to-remove powder coatings from intricate
part shapes. It is used in an immersion tank at room temperature eliminating
the need for heating. Additionally, waste solids can be filtered out to prolong
the useful life of the solution.
D-Zolve 1012 is compatible with most metals and plastics. It safely removes
powder coatings from galvanized steel, aluminum, zinc, copper, brass, carbon
steel and stainless steel as well as most plastic and silicone substrates.
It is non-flammable, does not contain known carcinogenic components and has
no hazardous air pollutant potential. It is readily biodegradable and contains
no ozone depleting components.
D-Zolve 298 Paint and Powder Coating Stripper
Designed
for use in immersion tank applications, D-Zolve™ 298 has a low viscosity,
can be diluted with water and heated to 150° F. It removes chrome-like indium
coatings, powder coatings, and hard-to-remove paints such as epoxy primer with
cross linked polyurethane top coats from metal and plastic parts. Compatible
with aluminum, stainless steels, carbon steels, aircraft metals, TPO and other
plastics, D-Zolve 298 contains no methylene chloride and no caustics. It is
non-flammable, non-carcinogenic, and has minimal air pollution potential.
Data Sheet
D-Zolve
1220 Paint and Powder Coating Stripper
D-Zolve™ 1220 is similar to D-Zolve 298 except it is high viscosity. It
is designed to used either with spray equipment or brush application. D-Zolve
1220 is a quick acting, industrial grade replacement for chlorinated and other
hazardous stripping solvents. It is available in as both a liquid and gel. Application
of D-Zolve does not require any costly equipment such as burn-off or blasting
systems and does not result in the need for wastewater treatment, dust-control,
or air scrubbing equipment.
Data Sheet
D-Zolve for Stripping Masking Plugs
-Zolve
removes powder coating buildup from plugs and other standard or custom molded
maskings extending the useful live of these devices and reducing replacement
costs. Designed to safely remove powder coatings from a wide range of materials
such as silicone and neoprene, D-Zolve efficiently removes several layers of
buildup from self-threading to dual-flanged pull plugs. When used in an immersion
tank, D-Zolve’s special properties lift layers of paint and break the
chemical bond between the powder coating and the substrate. When this bond breaks,
the paint layers pull away from the surface and fall to the bottom of the tank.
Data Sheet
Click here to see the other cleaning and stripping products
Solvent
Kleene, Inc.
119 Foster Street Bldg#6
Peabody, MA 01960
Tel: 978-531-2279
Fax: 978-532-9304
sales@solventkleene.com
Back to Powdercoatingonline.com Back to Customcoater.com
January 3, 2006