miles stripping

miles stripping solutions

MILES Chemical Solutions provides a complete line of paint stripping

solutions to remove E-Coat and Powder Coating as well as cured/wet-applied coatings. 

What's the benefit to you?

Ships as a concentrate and reduces with water by 50%, cost

effective.

Removes Powder Coating by lifting film from substrate

allowing easy removal by filtration, providing for long bath

life. 

Works well on carbon steel, stainless, aluminum, zinc and

magnesium substrates. 

Non-HAP (No Hazardous Air Pollutants), Environmentally

Friendly 

Economical at Only $20.00/Gallon in Drums, $10.00/Gallon

Operating Cost! 

Recycle Rework Powder Coating to reach zero defect coating

quality, in order to give your company a maximum

advantage. 

No one in the world offers, more complete line of paint

strippers for Paint Finishes, E-Coat and Powder Coat removal

than MILES Chemical Solutions

 

Complete line of Paint Stripping Solutions to

Remove E-Coat, Powder Coating, Cured/WetApplied Coatings.-

(248) 765-9946

powder coating chemical stripping

powder coating chemical strippers                                                               

3224 Fairfield Drive

Kissimmee, FL 34743

Phone: (248) 765-9946

Web site:  www.mileschemicalsolutions.com  

Click Here To Get Your Paint Stripping Recommendation

                                                  

Finishers “Recycle Your Rework” At a Competitive Price.

Remove Paint Finishes from Aluminum, Zinc and Steel Substrates With MILES #8641: New Product Technology

Testimonials

“An Ohio Paint Finishing Job Shop improved quality significantly by installing a hot strip process tank and utilizing

MILES #8641 concentrated paint stripping solution to recover powder coating rework and reprocess parts as first run to (o defect) standards.

A Missouri Powder Coater saved 50% per gallon of chemical cost by switching to MILES paint stripping solutions with additional savings using the concentrated product with 50% water.

 

We had jobs that required immersion in our former stripping solution for 6 hours or more in some cases. Now we can strip those same coatings in an hour or less.

Many parts strip clean in a matter of minutes. 

 

We now have the capability to strip Aluminum, Galvanized, and Steel with no damage to the substrate with a “MILES Chemical Solutions” single product.

 

MILES #8641 undercuts coatings in sheets that are easily removed by filtering, providing longer bath life for our stripping solution. 

We switched from the burn-off process and now chemically strip our E-Coat Hooks, Racks and Fixtures with much cleaner results and in minutes verses 8 to 12 hours turn-around time with the burn-off oven. We would recommend this product to other e-coat stripping operations with confidence.”
 

We also supply Fast, low temperature-MILES #8648 for Aluminum & Steel Stripping-(not recommended for zinc or

magnesium), as well as MILES # 8612 Eco-Powder Strip for dissolving your coating away from all metal substrates.

Contact us Today

To f ind out more about how we can cut cost and improve quality for Your Operation...

Phone: (248) 765-9946

Email: mailto:sam@mileschemicalsolutions.com

Website: www.MilesChemicalSolutions.com