Powder Paint Disposal Bags (PPDB) from Combustion and Systems, Inc. are the absolute best way to dispose of your excess powder coating. They provide powder coaters an easy, no-hassle, environmentally friendly way to dispose of their excess powder.
And now, even the largest powder coaters can dispose of their excess powder the RIGHT WAY with these two new, larger sizes:
Now available in three sizes:
- Standard Size: 24″ W x 36″ L – 40 lb capacity
watch the short video here to see how easy it is to use these bags! - 55 gallon drum liner – 150 lb capacity
- 60″x 500′ sheet rolls – custom size for large quantities
Then STOCK UP!
PPDB have…
- Enormous Strength
- Puncture and Chemical Resistance
- Thermal Resistance for up to 400 Degrees F
- Each standard bag measures 24″ wide x 36″ long & holds 40 lbs, of powder.
- NEW 55 gallon bags drum liners measure 37”W x 56”L and hold 150 lbs. of powder.
- NEW sheet liner – 60” x 500’ Rolls. – This is used to line custom metal containers to gel larger quantities of waste powder.
Click the image above to see a video on the Standard PPDBags
55 gallon drum liner
Sheet Liner rolls
The common practices of disposing excess powder are not safe or effective. Shoveling leftover powder into a box destined for the landfill poses environmental hazards, and placing that box into an oven to solidify the paint often creates a fire hazard.
The C&S solution is a bag made from a tough, high heat tolerant material that can withstand the temperatures of most ovens.
-Each Standard PPDB is 24″ wide x 36″ long and can hold 40 pounds of powder.
-Sheet Liners-Container size recommended – W 28” x L 78” x D 8”
-The 55 gallon drum liner holds 150 lbs.
The bags provide thermal resistance of 400 degrees F, are abrasion and puncture resistant, and have excellent chemical resistance.
Once the bag is filled with powder and heated, the contents will liquefy then harden, and the bag and its contents are ready for safe disposal. No worries. No hassle.
The process couldn’t be more simple: FILL. TIE. BAKE. TOSS.
- Load the powder into the bag
- Place the bag into a 350°F – 400°F oven for 20 minutes.
- Take it out, Let it cool, and seal the bag with the provided tie.
- Throw it away!
For ordering information. sales@combustionandsystems.com
or call Bev @ 812.308.1046
For more information and/or any technical questions about the new larger bags, please contact Doug: 513.260.5690 or doug@combustionandsystems.com
pcoadmin
