Finishing Resources
Fayetteville, Arkansas
Keith Baysinger: 719-661-9947
E-Mail: Finishingresources@yahoo.com
Website: www.FinishingResources.com
Six Stage SS Powder Coating System
48” W x 5′ H Opening, 10 FPM
scroll down for pics
Design Specifications:
• Part Opening: 4′ W x 5’ H
• Design Line Speed: 10 FPM
• Condition: Very nice!
• Manufacturer: GAT
6- Stage Stainless Steel /Poly Washer
• Dwell Times @ 10 FPM:
• S1 – Clean (60 sec @ 140°F.); S2 – Clean (60 sec @ 140°F); S3 – Rinse (30 sec @ amb.); S4 – Rinse (30 sec @ amb.); S5 – Iron Phosphate (60 sec @ 130°F); S6 – Rinse (30 sec @ amb.) 12’ Drainbacks
• Stages 1, 3 & 5 Heated with Hot Water Boiler .
• Gusher Pumps
• Dimensions: 12’-2” High x 10’-3” Wide x 90’ Long
Dry-Off and Cure Oven
• Dry-Off Oven.: 7’-9” wide x 38’-10” long x 9’-2” high
• Dry-Off Oven Zones: 1
• Design / Max Temperature:, 500 Deg Peak Temp
• Time Cycle (Dry-Off): 8 minutes @ 10 FPM
• Time Cycle (Cure): 22 minutes @ 10FPM
• Heating Gas fired Burner
• Oven Exhaust Fans, 2 per oven
• Adjustable Frames to move heaters closer to or further from part.
Conveyor System
• 980’ Long, 3” ibeam track Conveyor System
• (1) Cat Drive & Take-Up, Oiler, (1) Lot Horizontal Turns
• Floor-Mount Structure
• Can be reconfigured as needed.
Installation & Removal services are available and may be quoted per customer request.
Contact Keith @ 719-661-9947 or Finishingresources@yahoo.com for more info or questions.
Keith Baysinger: 719-661-9947 Finishingresources@yahoo.com
See list of used coating equipment available from Finishing Resources