Syntec Systems Corp
Saukville, WI 53080
Contact info:
Brad Collins: 608-630-3424
Email: bradley@syntecfinishing.com
Used Complete Batch Powder Coating System
10’W x 10’H x 30’L
Loaded!
scroll down for pics
Description:
Cross Draft Powder Booth
– Door Openings: 12’W x 9’-10 1/2”H
– Interior Dimensions: 18’W x 14’H x 30’L
– Overall Dimensions: 24’-4”W x 21’-6”H x 30’-4”L
– Drive Through Booth with double doors on both ends
– (4) PC-100 Powder Modules 4,000SCFM each
– 18in Bolt together Galvanized Panels
– (2) 3 Ton Hoists
– PC-40 Control Panel 3 Ph 480v
Wash Booth MFG by JBI
– Interior Dimensions: 18’W x 14’H x 30’L
– Drive Through Booth
– 3 Spray Wands
– 1 Steam Cleaner
– Nema 12 Control Panel 3 Ph 480v
Dry Off Oven MFG by JBI
– Door Openings: 10’W x 9’-10 ½”H
– Interior Dimensions: 10’W x 12’H x 28’L
– Total Dimensions: 13’-4”W x 17’-2”H x 29’L
– Drive Through Oven with Double Doors
– 3.0 Mil BTU AHO300 Eclipse Burner
– -33” Plug Fan w/PLR Wheel 20 Hp 3 PH 230/460V TEFC Motor, 43,000CFM @ 3” SP
– Max Operating Temp: 300 Degrees
– 4” Thick Tongue and Groove Panels
– Nema-12 480V Control Panel with Cycle Timer
– Top Mounted Burner Box
– Exhaust Stack 27’-2 ½” to the roof and 6’ stack above roof (If requested)
Cure Oven Mfg by GFS in 2005.
-Door Openings: 10’W x 9’-10 ½”H
-Interior Dimensions: 10’W x 12-1 ½”H x 30’L
-Total Dimensions: 13’-4 ¾”W x 17’-3 ½”H x 30’-8 ¾”L
-Drive through Oven with Double Doors on both ends
-2.0 mil BTU AHO 200 Eclipse Burner Nat Gas Req’d: 1000CFH@ 2PSI
-27” Plug Fan W PLR Wheel, 15 Hp 3 PH 230/460V TEFC Motor 15,500 CFM@ 3” SP
-Max Operating Temp: 400 Degrees
-4” Thick Insulated Tongue and Groove Panels
-Nema-12 480V 3 Phase Control Panel
-Top Mounted Burner Box
Cure Oven Mfg by JBI in 2002.
-Door Openings: 10’W x 9’-10 ½”H
-Interior Dimensions: 10’W x 12’H x 28’-4” L
-Total Dimensions: 13’-4”W x 17’-2”H x 29’L
-Drive Through Oven with Double Doors on both ends
-4.0 Mil BTU AHO 400 Eclipse Burner
-27” Plug Fan w/PLR Wheel, 15 HP, 3 PH 230/460V TEFC Motor, 14,000CFM@ 3” SP
-Operating Temp: 450 Degrees
-Max Operating Temp: 500 Degrees
-4” Thick Insulated tongue and groove panels
-Nema-12 480V Control Panel w/ Cycle timer
-Top Mounted Burner Box
-Exhaust Stack 27’-2 ½” to the roof and 6’ of stack above roof (If requested)
Used Liquid Paint Booth with Curing
– Door Opening: 12’W x 14’H
– Overall Dimension: 28’W x 37’L x 20’L
– Drive Through Booth with Double Doors
– Air Makeup Unit
– Max Operating Temp 180 Degrees
– 18 in Bolt together galvanized panels
– (2) 3 Ton Hoists
– Nema 12 Control Panel 3 Ph 480v
– Paint Storage Room
Miscellaneous items included:
-Rack Moving cart
-Racks
Application Equipment Included:
– Gema OptiFlex Manual Box Feed Unit
– Graco 2K Paint Mixers and Spray Guns
Contact info:
Brad Collins: 608-630-3424
Email: bradley@syntecfinishing.com